涠洲油田群生产处理中心优化产能建设配套项目涠洲12-1B平台高完整性压力保护系统采购公告

标段（包）编号

（略）CP（略）

发标日期

（略）

主要技术规格

1）HIPPS关断阀执行机构应满足在450 kPaG气源压力和阀门在最大压差（20900kPa）下，执行机构扭矩不小于 HIPPS阀门从打开位置到关闭所需扭矩的2.5倍。2）从压力变送器测量值达到其设定值至 HIPPS 关断阀完全关闭总时间应小于3秒。1）HIPPS shut-off valve actuator should meet the 450 kPaG gas so（略） pressure and the valve in the maximum differential pressure (20900kPa), the actuator torque is not less than HIPPS valve from the open position to close the required torque 2.5 times. 2）The total time from when the measured value of the pressure transmitter reaches its set value to when the HIPPS shut-off valve is completely closed shall be less than 3 seconds.

交货期/服务期（略）

合同签订后9个月内交货

交货数量

招标范围

出资比例

生产能力

资格要求

资格要求：A．如果投标人为境内注册公司，投标人需提供合法有效的企业法人营业执照、税务登记证及组织机构代码证或证照合一的营业执照；如果投标人为境外注册公司，需提供有效的公司登记注册证明。The bidder within the customs territory shall provide valid independent legal person business license, tax regi（略）certif（略）organi（略）code certificate, or combined certifi（略）and business li（略）.The bi（略）outside the customs territory shall provide valid certificate to prove valid business registration certificate. B.HIP（略）（如TUV、E（略））SIL3认证证书，投标人承诺交货后两个月内提供 HIPPS整撬第三方（如TUV、E（略））Sil3证书。HIPPS whole skid by the third party issued (such as TUV, Exida, FM or UL, etc.) SIL3 certificate, the bidder undertakes to provide HIPPS whole skid third party (such as TUV, Exida, FM or UL, etc.) Sil3 certificate within two months after delivery.C.HIPPS所使用逻辑解算器须达SIL3等级，投标时（略）。HIPPS logic solver used shall reach SIL3 level, the bidding shall provide logic solver SIL3 certificate.D.投标人应为逻辑解算器的制造商或授权集成商，投标时须提供逻（略）。The bidder shall be the manufacturer or authorized integrator of the logic solver, and shall provide the certificate of authorization of the logic solver manufacturer at the time of bi（略）.E.HIPPS所使用关断阀须达SIL2级，投标时须提供SIL2认证证书。HIPPS shut-off valves used shall be up to SIL2 level, and SIL2 certification shall be provided at the time of bi（略）.F.关断（略）提供SIL3证书。Shut-off valve actuator and actuator solenoid valve, ac（略）tr（略）switch are required to meet the SIL3 level, bi（略）need to provide SIL3 certificate.G.HIPP（略）API 6D 标准要求，并且符合 API 607 或 API6 FA 耐火试验标准，投标人承诺交货时须提供API型式认可证书及有效的符合API 607或API6 FA阀门防火认证证书。HIPPS valves must at least meet the requirements of API 6D standards and co（略）with API 607 or API6 FA fire test standa（略）the bidder undertakes to deliver the API type approval certificate and a valid certificate of compliance with API 607 or API6 FA valve fire certification.H.HIPPS关断阀泄漏等级应满足ISO-5208标准B级要求，投标人承诺交货时须提供船级社第三方证书。HIPPS shut-off valve leakage level should meet the requir（略）of ISO-5208 standard class B. The bidder is co（略）to provide third-party certificates of classification societies at the time of delivery.I.投标人应承诺自行委托国家安全（略）(CO（略）) 认可的下列任一家船级社 (ABS, DNV, BV 和 CCS) 对HIPPS整体进行检验并获得检验证书。并将发证机构签发的设计评审报告和检验证书提交买方，投标人承诺交货后两个月内须提供船级社 (ABS, DNV, BV 和 CCS) HIPP（略）。The bidder shall undertake to commission any one of the following Class（略）Societies (ABS, DNV, BV and CCS) recognized by the Offshore Oil Safety Of（略）(COOOSO) of the State Administration of Work Safety to carry out the inspection of the whole HIPPS and obtain the inspection certificate. The Design Review and Inspe（略）Certificate issued by the issuing organization shall be submitted to the buyer, and the bidder undertakes to pr（略） Classification Societies (ABS, DNV, BV and CCS) with the HIPPS whole skid inspection certificate within two months after delivery.

招标文件领取时间

（略）至 （略）

招标文件领取方法

请登录中国海洋石油集团有限公司采办业务管理与交易系统（https://（略）com.cn）的招标公告页面进行购买。首次登录必须先进行注册（免费），注册成功后，方可购买招标文件。购买过程必须全程在线操作，线下形式的汇款将不予接受。标书费支付成功后，投标人可自行下载招标文件。售后不退。如未在系统中领购招标文件，不可参加投标。

招标文件价格

200.00元

投标文件递交截止时间

（略）09时30分

投标地点

所有的投标文件必须在投标文件截止时间前在线提交

投标文件递交方法

所有的投标文件必须在投标文件递交截止时间前在线提交

开标时间

（略）09时30分

开标地点

中国海油供应链数字化平台

特殊说明

如有内容不一致，以公告附件中的招标公告为准。